Positioning the Digital Camera in the
Waterproof Case
Before installation, check the following:
• To avoid losing power while shooting underwater, charge the battery fully before
use.
• Check how many new images can be stored on the media.
• Remove the hand strap from the digital camera. Using the camera in the waterproof
case with its strap may cause the case to leak.
1
Turn the camera off.
2
Open the waterproof case (pg. 8) and set the camera in it.
Slip the camera into the waterproof case
until it stops securely.
When opening or closing the waterproof
case, take care not to catch your fingers
or palm in the case.
When setting the camera, pay attention
to the position of the camera upon
attachment.
EN-11