Publicité
Les langues disponibles
Les langues disponibles
REPEAT TIMER
Use this to set two timers. Each timer can use the
DIVIDER, SOURCE and WORK TIME functions.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9)
before the following operations.
Example:
TIMER1...VIDEO1 will be displayed for 3 minutes.
TIMER2...PC1 will be displayed for 6 minutes in a
2×2 video wall.
On "REPEAT TIMER" of "VIDEO WALL" menu, select
"ON", then press the MENU/SET button.
The "REPEAT TIMER" screen appears.
Adjust the items.
REPEAT TIMER
1 DIVIDER
SOURCE
WORK TIME
2 DIVIDER
SOURCE
WORK TIME
SEL.
ADJ.
Information
REPEAT TIMER settings
DIVIDER: Divide the screen into 1, 4 or 9 sections.
SOURCE: Set the input mode to be displayed.
WORK TIME: Can be set to up to 4 hours 15 minutes
in units of 1 minute.
If you set both timers, Timer 1 and Timer 2 run
consecutively.
In the case of the Video wall, timer No.1 can be used to
control all the displays simultaneously.
* This becomes effective when the OSD goes out.
Advanced OSD Settings Menu
Setting the menu mode
This allows you to access full menu items.
When P. ON DELAY or ABL LINK is ON, this won't be
turned OFF.
Example: Setting "ON"
On "ADVANCED OSD" of "MAIN MENU", select "ON".
MAIN MENU
1 / 2
PICTURE
SOUND
SCREEN
OPTION1
ADVANCED OSD
:
OFF
NEXT PAGE
SEL.
ADJ.
EXIT EXIT
Information
ADVANCED OSD settings
ON: All of the main menu items are available for
advanced users.
OFF: Some of the main menu items are not available
(e.g. OPTION2 and OPTION3).
:
1
:
VIDEO1
:
00H03M
:
4
:
PC1DSUB
:
00H06M
EXIT RETURN
MAIN MENU
1 / 2
PICTURE
SOUND
SCREEN
OPTION1
OPTION2
OPTION3
ADVANCED OSD
:
ON
NEXT PAGE
SEL.
ADJ.
EXIT EXIT
Color System Settings Menu
Setting the video signal format
Use these operations to set the color systems of composite
video signals or Y/C input signals.
Example: Setting the color system to "3.58 NTSC"
On the MAIN MENU, select "COLOR SYSTEM", then press
the MENU/SET button.
The "COLOR SYSTEM" screen appears.
On "COLOR SYSTEM", select " 3.58NTSC ".
COLOR SYSTEM
COLOR SYSTEM
ADJ.
Information
Video signal formats
Different countries use different formats for video
signals. Set to the color system used in your current
country.
AUTO: The color systems are automatically identified
and the format is set accordingly.
PAL: This is the standard format used mainly in the
United Kingdom and Germany.
SECAM: This is the standard format used mainly in
France and Russia.
4.43 NTSC, PAL60: This format is used for videos in
countries using PAL and SECAM video signals.
3.58 NTSC: This is the standard format used mainly
in the United States and Japan.
PAL-M: This is the standard format used mainly in
Brazil.
PAL-N: This is the standard format used mainly in
Argentina.
Source Information Menu
Checking the frequencies, polarities of input
signals, and resolution
Use this function to check the frequencies and polarities
of the signals currently being input from a computer, etc.
On "MAIN MENU", select "SOURCE INFORMATION",
then press the MENU/SET button.
The "SOURCE INFORMATION" is displayed.
SOURCE INFORMATION
H. FREQUENCY
V. FREQUENCY
H. POLARITY
V. POLARITY
MEMORY
RESOLUTION
PC:
MEMORY will be displayed.
Others: MODE will be displayed.
:
3.58NTSC
EXIT RETURN
:
48.4kHz
:
60.0Hz
:
NEG.
:
NEG.
:
24
×
:
1024
768
EXIT RETURN
27
En
Publicité
