Publicité
Les langues disponibles
Les langues disponibles
Option2 Settings Menu
Setting the power management for computer
images
This energy-saving (power management) function
automatically reduces the monitor's power consumption
if no operation is performed for a certain amount of time.
Example: Turning the power management function on
Set "ADVANCED OSD" to "ON" in the main menu (1/
2), then perform the following operations.
On "PWR. MGT." of "OPTION2" menu, select "ON".
OPTION2
PREVIOUS PAGE
PWR. MGT.
PURECINEMA
LONG LIFE
SIDE MASK
S1/S2
DVI SET-UP
NEXT PAGE
SEL.
ADJ.
Information
Power management function
* The power management function automatically reduces
the monitor's power consumption if the computer's
keyboard or mouse is not operated for a certain amount
of time. This function can be used when using the
monitor with a computer.
* If the computer's power is not turned on or if the
computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer's power
management function, refer to the computer's operating
instructions.
Power management settings
ON: In this mode the power management function is
turned on.
OFF: In this mode the power management function is
turned off.
Power management function and STANDBY/
ON indicator
The STANDBY/ON indicator indicates the status of
the power management function. See below for
indicator status and description.
STANDBY/ON indicator
Power
STANDBY/
Power
management
ON indicator
management
mode
operating status
On
Green
Not activated.
Off
Red
Activated.
2 / 3
:
ON
:
ON
:
3
:
OFF
EXIT RETURN
Description
Turning the picture
back on
Horizontal and vertical
Picture already on.
synchronizing signals
are present from the
computer.
Horizontal
and/or
Operate the keyboard or
vertical synchronizing
mouse.
The
picture
signals are not sent
reappears.
from the computer.
Setting the picture to suit the movie
The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I
(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the "PURECINEMA" to "OFF"
Set "ADVANCED OSD" to "ON" in the main menu (1/
2), then perform the following operations.
On "PURECINEMA" of "OPTION2" menu, select "OFF".
OPTION2
PREVIOUS PAGE
PWR. MGT.
PURECINEMA
LONG LIFE
SIDE MASK
S1/S2
DVI SET-UP
NEXT PAGE
SEL.
ADJ.
Information
PURECINEMA
ON: Automatic discrimination of the image and
projection in PURECINEMA.
OFF: PURECINEMA does not function.
Reducing burn-in of the screen
The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce burn-in of the screen.
Set "ADVANCED OSD" to "ON" in the main menu (1/
2), then perform the following operations.
On "OPTION2" menu, select "LONG LIFE", then press the
MENU/SET button.
The "LONG LIFE" screen appears.
LONG LIFE
ABL
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
SEL.
ADJ.
ABL (Auto Brightness Limiter)
Use this to activate the brightness limiter.
Example: Setting "ABL" to "LOCK1"
On "ABL" of "LONG LIFE" menu, select "LOCK1".
LONG LIFE
ABL
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
SEL.
ADJ.
Information
ABL settings
AUTO: The brightness of the screen is adjusted
automatically to suit the picture quality.
LOCK1, 2, 3: Sets maximum brightness.
The brightness level decreases in the order of LOCK 1,
2, 3. LOCK 3 provides minimum brightness.
2 / 3
:
OFF
:
OFF
:
3
:
OFF
EXIT RETURN
:
AUTO
:
OFF
:
OFF
:
OFF
:
OFF
EXIT RETURN
:
LOCK1
:
OFF
:
OFF
:
OFF
:
OFF
EXIT RETURN
19
En
Publicité
