When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring
basic settings. To begin Setup, press the
Setup is available only when the input source is set to TV. See "Changing the Input Source" (p. 12).
To return to the previous step in the Setup sequence, Select Previous.
Before you begin, make sure you have connected the TV to an aerial or a cable connection and that
the TV is plugged in. (p. 7).
To start the Setup select Start.
1
Menu Language:
Selecting a menu
language
2
Use Mode: Select
the Home Use Mode.
3
Network Settings:
Configure network
settings
To connect later,
select Skip.
4
Software Upgrade:
Upgrading the
software to latest
version
To upgrade later,
select Skip.
5
Terms of Service
Agreement
6
Select Country.
(Depending on the
country)
7
Auto Tuning (1):
Selecting how you
watch your TV
Setup (Initial Setup)
button on your remote.
P
Select a menu language you want using your remote, and then select
Next. The TV will be displayed a menu using the selected language since
next step.
Select Home Use using your remote, and then select Next. Store Demo
mode is for retail environments.
To set up your network connection, select Start using your remote. If
you do not know your network set up information or want to set to it
later, select Skip. For more detailed information, refer to "Setting up the
Wired or Wireless Network" in the e-Manual for set up requirements and
instructions, and the Network Connection section of this manual (p. 13).
You can set up the network connection later using the Network menu.
Select Next to upgrade TV software. Your TV will automatically upgrade,
if your TV need a software upgrade. If you want to upgrade later, select
the Skip. For more information, refer to Software Upgrade (Preference
Features → Support Menu) in the e-Manual.
This may take some time, depending on network status.
When the Network Settings is completed, The Terms of Service
Agreement screen appears.
The screen can take a few seconds to appear.
The General Disclaimer screen appears. Select Agree. The Privacy
policy screen appears. Select Agree.
To use the Smart Hub, you should select Agree from the Terms of
Service Agreement.
Select the appropriate country.
After selecting the country in the country menu, some models may
proceed with an additional option to setup the pin number.
Let's find and store channels on your TV. Do you need to search for
channels?
• Yes, I need to.: All the channels available will be found and stored on
your TV.
• No, I don't need to.: My set-top box provides all the channels that
are available, so I don't need to search for channels.
English - 8