Hilti TE 60-AVR Mode D'emploi Original page 14

3.8 Quick-release chuck (accessory)
The quick-release chuck makes changing accessory tools a quick operation
with no additional tools needed. It is suitable for accessory tools with
cylindrical or hexagonal shank used in the "Without hammering action
mode.
3.9 Service indicator
The product is equipped with a service indicator LED.
3.9.1 Service indicator status
Status
The service indicator lights.
The service indicator blinks.
3.10 Items supplied
Combihammer, side handle, operating instructions.
4 Technical data
When powered by a generator or transformer, the generator or transformer's
power output must be at least twice the rated input power shown on the rating
plate of the power tool. The operating voltage of the transformer or generator
must always be within +5% and -15% of the rated voltage of the power tool.
The information given applies to a rated voltage of 120 V. The data may vary
in the event of deviations from the rated voltage and for country-specific
versions. Please refer to the power tool's type identification plate for details
of its voltage, frequency, current and input power ratings.
Rated current input
AC frequency
Weight
Single impact energy in ac-
cordance with EPTA proce-
dure 05
Hammer drill bits, Ø
8 English
Meaning
End of service interval – servicing is
due.
Have the combihammer repaired by
Hilti Service.
TE 60­AVR
13 A
60 Hz
15.0 lb
(6.8 kg)
7.8 J
1/2 in ... 2 3/16 in
(13 mm ...
55.6 mm)
2134961
TE 60-ATC/AVR
13 A
60 Hz
17.2 lb
(7.8 kg)
7.8 J
1/2 in ... 2 3/16 in
(13 mm ...
55.6 mm)
*2134961*
"