PLYMOVENT Plymoth Manuel Opérateur page 3

EXTrAcTor crAnE
"Plymoth "
®
Extractor crane
"Plymoth
PlymoVent Extractor crane "Plymoth
A proven all-in-one solution for both re-mo ving fumes from the working environ-ment and
for suspending your workshop equipment so it will move around with you. Perfect for the
heavy industrial environment including welding work shops, the motor, plastics and chemi-
cal industries. The Extractor crane consists of a horizontal, long reach, rigid suspension
arm mounted on ball-bearings and hinged in the middle with a telescopic vertical end
section. Both inner and outer horizontal arms are designed and constructed to carry
heavy loads without losing their manoeuvrability. From these arms can be suspended
wire-feeder units, cables, hand tools etc. convenient, practical and economical.
delivery
The Extractor crane is delivered complete with wall mounting bracket for direct mounting
of the PlymoVent Fuk fan or connec-tion to a central system.
Advantages
• More cost effective to use a combined extractor and suspension arm,
than two separate units. Prevents collision between tools and extractor.
• The suspension arm can be easily moved sideways and the hood
raised and lowered with just one hand.
• Tools suspended on the arm (welding torch, grinding machine, etc.)
are always in place wherever and whenever you need them. Saving
time!
3 m
components and operation
A Wall mounting bracket.
B Inner suspension arm hinged in double
ball-bearings with
adjustable friction pad.
c Sliding suspension "runner" with 50
kg/ 110 LB capacity.
d outer suspension arm hinged in
double ball-bearings with
adjustable friction pad.
E Suspension hook with 10 kg/22 LB
capacity.
F rigid 90° bend.
G Pulley wheel.
H Fixing bar for vertical section.
0000101019/071013/A UK "Plymoth"
"
®
" is a combined fume extractor and sus pension arm.
®
Prod. no:
uk-3016
4,5 m
uk-4516
6 m
uk-6016
8 m
uk-8016
*Hose and rigid tubing
I counterweight cord.
J Telescopic Tube.
k Flame-resistant hose, Ø160
mm/6,30" made from PVc coated
woven
polyamide with inner steel spiral.
(resistant to 85°c when in constant
use.)
L Streamlined counter-weight desig-
ned for minimum air turbulence.
M universal joint.
n optimally designed hood with
quick-fit coupling.
TEcHnIcAL dEScrIPTIon
© Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from PlymoVent AB. PlymoVent AB reserves the right to make design changes.
• Reduced wear-and-tear on cables and equipment, as
it is suspended from the Extractor crane. Easier to tidy
up and keep clean.
Max. wor- Length hori-
king radius zontal hose in
in m/ft m/ft*
3/9,8 4/13,1
4,5/14,8 5,5/18
6/19,7 7/23
8/26,2 9/29,5
Handling
1. 360° ring handle for positioning of the hood.
can be reached from all sides.
2. damper control knob.
3. Quick-fit catch for simple exchange
of extension hose and hood.
4. Switch for light cartridge
(see accessories HL-20/24).
5. Switch for manual start/stop of
fan or damper (see accessories
SA-24, ES-90 or IcE-Lc).
Hood operation
The black, enamelled anodised metal
hood can be angled 110° forwards,
backwards and to the sides. Large,
360°, ring handle, Ø300 mm/11,81".
Length Total Hose diame-
vertical hose Length ter in mm/
in m/ft in m/ft*
3/9,8 7/23 160/6,30
3/9,8 8,5/27,9 160/6,30
3/9,8 10/32,8 160/6,30
3/9,8 12/39,4 160/6,30
inches
Switch
assembly
uk/En/2/15
EN - 2