Safety Functions - Deltafox DG-ECS 1830 Traduction De La Notice D'utilisation Originale

Kickback forces can be controlled by
the operator, if proper precautions are
taken. Do not let go of the chain saw
b) Do not overreach and do not cut
above shoulder height. This helps pre-
vent unintended tip contact and enables
better control of the chain saw in unex-
pected situations..
c) Only use replacement bars and
chains specified by the manufac-
turer. Incorrect replacement bars and
chains may cause chain breakage
and/or kickback.
d) Follow the manufacturer´s sharpen-
ing and maintenance instructions
for the saw chain. Decreasing the
depth gauge height can lead to in-
creased kickback.
9) RESIDUAL RISKS
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Cuts
c) Ear damage if working without ear
protection.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer
periods of time or if the unit is not held
or maintained properly.
Warning! During operation, this
electric tool generates an elec-
tromagnetic field which, under
certain circumstances, may
impair the functionality of active
or passive medical implants. To
reduce the risk of serious or le-
thal injuries, we recommend that
persons with medical implants
consult their doctor and the
manufacturer of their medical
implant before operating the ma-
chine.

Safety functions

1 Rear grip with hand guard
Protects the hand against branch-
es and boughs in the case of
springing away by the chain.
4 Chain braking lever/hand guard
Control system, which stops the
saw chain immediately in case
of a spring-back; lever can also
be activated manually; protects
the left hand of the operator if it
slides from the front grip.
6 Saw chain with small spring-
back
Helps you to catch spring-backs
with specially developed control
systems.
8 Metal stop claw
Reinforces the stability when
vertical cuts are carried out and
facilitates sawing.
10 Electric motor
Double insulated for safety rea-
sons.
11 On-off switch with safety
chain brake
On releasing the On/Off switch,
the device immediately switches
off.
12 Switch-on block
The switch-on block must be re-
leased for switching on the device.
13 Chain catcher
Decreases the danger of injuries if
the chain breaks or if it comes off.
GB
35