Maintaining The Chain Bar; Storage; Waste Disposal And Environmental Protection - Deltafox DG-ECS 1830 Traduction De La Notice D'utilisation Originale

Maintaining the chain bar

Use cut-protection gloves when
handling the chain or the chain
bar.
The blade must be inverted every 8-10
working hours in order to guarantee even
wear (see chapter "initial operation").
1. Switch off the saw and pull out the
power plug.
2. Remove the sprocket chain wheel
covering, the saw chain and the chain
bar.
3. Check the chain bar for wear. Re-
move burrs and straighten the guide
surfaces with a flat file.
4. Clean the oil passages (
chain bar, in order to guarantee a
trouble-free, automatic oiling of the
saw chain during operation.
5. Mount chain bar, chainsaw and
sprocket chain wheel covering and
tighten the chainsaw.
With the oil nozzles in good
condition and the oil regulator
set correctly, the saw chain will
spray a little oil off after starting.

Storage

•
•
•
•
Waste disposal and
environmental protection
Do not dispose of used oil in the sewage
23) of the system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Empty the oil tank carefully and hand
in your electric chainsaw at a disposal
center. The plastic and metal parts em-
ployed can be separated out and thus re-
cycled use can be implemented. Ask our
Service-Center for details. We dispose of
your defective devices free of charge.
Clean the equipment before putting it
away.
Empty the oil tank before longer peri-
ods of non-use. Dispose of waste oil
environmentally correctly (see „Waste
disposal and environmental protec-
tion").
Put on saw bar protection sheath.
Store the appliance in a dry place well
out of reach of children.
Machines do not belong with
domestic waste.
GB
45