senya SYBF-CM008 Notice D'utilisation page 21

Note: If the preheating is not completed and the appliance don't work, please wait patiently.
5. Press double cup button, the appliance will pump water for about 25s, pour out water in the
cup then clean them thoroughly, now the appliance is ready for making coffee.
Note: There may be noise when pumping water for the first time, it is normal that the appliance
is releasing the air inside. After about 20s, the noise will disappear.
III.2 USING THE APPLIANCE
III.2.1 MAKE ESPRESSO
To make a good cup of Espresso coffee, we recommend you should preheat the appliance before
making coffee, including filter, funnel holder and cup, so that the coffee flavour can not be
influenced by cold parts.
1. Remove funnel by turning it clockwise. fill coffee powder into filter with coffee spoon, then
press coffee powder tightly with the tamper.
Note:
 To make a single coffee , Place a spoon (about 7-8g )of coffee powder into the filter. Double
coffee Place 2 spoon (about 14-15 g )of coffee powder into the filter (Fig 1).
 Use one hand to compress the coffee powder in the filter evenly. The force is about 3.3
pounds (1.5kg). Make sure that the compressed coffee powder does not exceed the "Max"
mark (Fig 2).
Fig 1
2. Put the funnel into main body from the "INSERT" position, make sure the buckle on the funnel
holder aligns with groove in the appliance, and then turn it right to the "LOCK" position.
3. Place a cup on removable shelf.
4. After preheating is completed, press single cup or double cup button, the appliance will start
brewing,.
Note:
 Default working time for single cup button is 15 seconds and double cup button is 25
seconds .
 When the amount of coffee you need has been obtained, you can press the work button to
stop brewing coffee.
 Do not leave the coffee maker unattended during making coffee.
 The appliance cannot work if it is not preheated.
Fig 2
20