Publicité
Les langues disponibles
Les langues disponibles
z Various ways of
playback
Playing tracks repeatedly
You can play tracks repeatedly in three ways-
-all repeat, single repeat, and shuffle repeat.
PLAY MODE
Press PLAY MODE while the player is
playing an MD.
Each time you press PLAY MODE, the play
mode indication changes as follows.
Play mode indication
SHUF
"(none)" (normal play)
Z
All the tracks are played once.
.
"f" (all repeat)
All the tracks are played
repeatedly.
.
"f1" (single repeat)
A single track is played
repeatedly.
.
"f SHUF" (shuffle repeat)
All the tracks are played
repeatedly in random order.
Tips on playback
To know the track name and time
Press DISPLAY while the player is playing an
MD.
Each time you press DISPLAY, the display
changes as follows.
DISPLAY
Track number
1SHUF
Elapsed time
Track number
1SHUF
Number of the
Track name
track recorded
on the MD.
1SHUF
Disc name
Note
Disc and track names appear only with MDs that
have been electronically labeled.
To lock the controls
To prevent the buttons from being
accidentally operated when you carry the
player, use this function.
HOLD
Slide HOLD in the direction of the c.
On the player, slide HOLD to lock the
controls of the player.
To emphasize bass (MEGA BASS
feature)
The MEGA BASS feature intensifies low
frequency sound for richer quality audio
reproduction.
MEGA BASS
Slide MEGA BASS.
Choose 1 (slight effect) or 2 (strong effect). To
cancel the effect, set MEGA BASS to 0.
Note
If the sound is distorted when emphasizing bass,
turn down the volume.
To protect your hearing (AVLS)
The AVLS (Automatic Volume Limiter
System) function keeps down the maximum
volume to prevent excessive sound from
harming your ears.
AVLS
Set AVLS to LIMIT.
The volume is kept at a moderate level, even
if you try to turn the volume above the
limited level.
z Power sources
You can use the player on house current, dry
batteries, a nickel metal hydride rechargeable
battery.
Using on dry batteries
Install two size AA (LR6) alkaline batteries
(not supplied), and close the lid.
When to replace or charge the batteries
You can check the battery condition with the
battery indication displayed while using the
player.
B
Used batteries
v
Weak batteries. Replace all the batteries
b
v
The batteries have gone out."LoBATT"
n
flashes in the display, and the power goes
off.
Battery life*
Batteries
Playback
Two size AA (LR6)
Approx. 4 hours
alkaline batteries
Nickel metal
Approx. 3 hours
hydride
rechargeable
battery (BP-DM20)
* The battery life may be shorter due to
operating conditions and the temperature of
the location.
Using on a nickel metal
hydride rechargeable
battery
Before using the rechargeable battery BP-
DM20 (not supplied) for the first time, charge
it.
1
Connect the supplied AC power adaptor.
to wall outlet
AC power adaptor
(supplied)
to DC IN 4.5 V
2
Insert the rechargeable battery, and close
the lid.
The projection on the
battery comes on the right.
3
Press pSTOP/CHARGE on the player.
"Charge" flashes and the battery
indication appears in the display and
charging starts. When charging is
completed, "Charge" and the battery
indication go out.
A completely discharged battery takes
about 3 hours to charge fully. To stop
charging before the battery is fully
charged, press pSTOP/CHARGE.
4
Disconnect the AC power adaptor.
As long as the player is connected to the
AC power, the power will be supplied
from the AC source instead of the battery.
Notes
• Be sure to use the supplied AC power adaptor.
• Charging time may vary depending on the
battery condition.
• When you use the battery for the first time or
after a long period of disuse, the battery life
may be shorter. In this case, charge and
discharge the battery several times. The battery
life will be restored.
• If the rechargeable battery capacity becomes
half the normal life, replace it with a new one.
zAdditional information
Precautions
On safety
• Do not put any foreign objects in the DC
IN 4.5 V jack.
On power sources
• Use the house current, two size AA (R6)
batteries, nickel metal hydride
rechargeable battery, or car battery.
• For use in your house: Use the AC power
adaptor supplied with this player. Do not
use any other AC power adaptor since it
may cause the player to malfunction.
Polarity of the plug
• The player is not disconnected from the AC
power source (mains) as long as it is
connected to the wall outlet, even if the
player itself has been turned off.
• If you are not going to use this player for a
long time, be sure to disconnect the power
supply (AC power adaptor, dry batteries,
rechargeable batteries, or car battery cord).
To remove the AC power adaptor from the
wall outlet, grasp the adaptor plug itself;
never pull the cord.
• For use in the car: Use the CPA-9 car
connecting pack (not supplied).
On heat build-up
• Heat may build up in the player if it is
used for an extended period of time. In this
case, leave the player to cool down.
On installation
• Never use the player where it will be
subjected to extremes of light, temperature,
moisture or vibration.
• Never wrap the player in anything when it
is being used with the AC power adaptor.
Heat build-up in the player may cause
malfunction or injury.
On the headphones
Road safety
Do not use headphones while driving, cycling, or
operating any motorized vehicle. It may create a
traffic hazard and is illegal in many areas. It can
also be potentially dangerous to play your player
at high volume while walking, especially at
pedestrian crossings. You should exercise
extreme caution or discontinue use in potentially
hazardous situations.
Preventing hearing damage
Avoid using headphones at high volume.
Hearing experts advise against continuous, loud
and extended play. If you experience a ringing in
your ears, reduce the volume or discontinue use.
Caring for others
Keep the volume at a moderate level. This will
allow you to hear outside sounds and to be
considerate of the people around you.
On the MiniDisc cartridge
• Do not break open the shutter.
• Do not place the cartridge where it will be
subject to light, temperature, moisture or
dust.
On cleaning
• Clean the player casing with a soft cloth slightly
moistened with water or a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or
benzene as it may mar the finish of the casing.
• Wipe the disc cartridge with a dry cloth to
remove dirt.
• Dust on the lens may prevent the unit from
operating properly. Be sure to close the disc
compartment lid after inserting and ejecting an
MD.
Notes on the batteries
Incorrect battery usage may lead to leakage of
battery fluid or bursting batteries. To prevent
such accidents, observe the following
precautions:
• Install the + and – poles of the batteries
correctly.
• Do not install new and used batteries or
different kinds of batteries together.
• Do not try to recharge the batteries.
• When the player is not to be used for a
long time, be sure to remove the batteries.
• If a battery leak should develop, carefully
and thoroughly wipe away battery fluid
from the battery compartment before
inserting new ones.
Publicité
