Salvis 620 Série Traduction Du Mode D'emploi D'origine page 21

6. Door stop change from right to left
6.1 Single door models
Open the door at 90°.
Unscrew the screw at the
underside of the panel.
Screw the lower left hinge tight. Turn
the door about 180° and insert it.
Secure the door and fix the upper left
hinge.
Fold the panel upward and
secure it against fall down.
Remove the screws at the upper
right hinge. Lift the door out.
21
Remove the screws at the
lower right hinge. Remove
the hinge.
Break out the break-out for the hinge in
the panel on the left. Close the panel
and screw it tight.