REMS Hot Dog 2 Notice D'utilisation page 5

Garantie nicht eingeschränkt. Diese Hersteller-Garantie gilt nur für Neuprodukte,
welche in der Europäischen Union, in Norwegen oder in der Schweiz gekauft
und dort verwendet werden.
Für diese Garantie gilt deutsches Recht unter Ausschluss des Übereinkommens
der Vereinten Nationen über Verträge über den internationalen Warenkauf
(CISG).
8. REMS Vertrags-Kundendienstwerkstätten
Firmeneigene Fachwerkstatt für Reparaturen:
SERVICE-CENTER
Neue Rommelshauser Straße 4
D-71332 Waiblingen
Telefon (07151) 56808-60
Telefax (07151) 56808-64
Wir holen Ihre Maschinen und Werkzeuge bei Ihnen ab!
Nutzen Sie in der Bundesrepublik Deutschland unseren Abholservice.
Einfach anrufen unter Telefon (07151) 56808-60, oder Download des Abho-
lauftrages unter www.rems.de
Abholauftrag.
Oder wenden Sie sich an eine andere autorisierte REMS Vertrags-Kunden-
dienstwerkstatt in Ihrer Nähe.
9. Teileverzeichnisse
Teileverzeichnisse siehe www.rems.de
Translation of the Original Instruction Manual
Fig. 1:
1 Soldering piece
2 Heating cartridge
3 Handle
Fig. 2:
NOTICE
tube!
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
if your body is earthed or grounded.
tool will increase the risk of electric shock.
connecting cable to carry or hang up the power tool or
to pull the plug out of the socket. Keep the connecting cable
increase the risk of electric shock.
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
electric shock.
3) Personal safety
a power tool. Do not use a power tool while you are tired or under the
operating power tools may result in serious personal injury.
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
on invites accidents.
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
better control of the power tool in unexpected situations.
hair can be caught in moving parts.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
ures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
tool. Power tools are dangerous in the hands of untrained users.
accidents are caused by poorly maintained power tools.
consideration. The use of power tools for purposes for which they are not
intended can lead to dangerous situations.
Power tools create sparks which
Unmod-
There is an increased risk of electric shock
Water entering a power
Damaged or knotted cables
Use of an RCD reduces the risk of
A moment of inattention while
Protective
Carrying power
This enables
Loose clothes, jewellery or long
Such preventive safety meas-
Many
g
-
A