Recordings - Enerdis ULYSCOM ETHERNET MODBUS TCP Manuel Utilisateur

Recordings

This section allows to enable, download or delete a measurement data recording.
In case of User account access only data downloading is possible.
Enable recordings
Enable
Rate
CSV data separator
Date format
Download key
Clear key
Select All key
Deselect All key
Accept key
Cancel key
WARNING: The recording mode is FILL. When the memory space is filled till 90% of its maximum capacity, an error
message is displayed.
NOTE: Before recording, it is suggested to synchronize ULYSCOM ETHERNET date and time.
30
Reserved to the Administrator. Check this checkbox to enable the set recording.
Reserved to the Administrator. Check the relevant checkbox to enable the parameter for recording.
Reserved to the Administrator. It allows to set the recording rate (in days, hours, minutes or seconds).
To confirm the set rate, press apply key.
Reserved to the Administrator. It allows to select the data separator in the *.CSV recording file to be
downloaded. Available data separator: semicolon (;), comma (,), tab or space. To confirm the selection, press
apply key.
Reserved to the Administrator. It allows to select the date format in the *.CSV recording file to be
downloaded. Available date format: yyyy/MM/dd, yyyy-MM-dd, dd/MM/yyyy, dd-MM-yyyy, MM/dd/yyyy,
MM-dd-yyyy. To confirm the selection, press apply key.
Downloads the recorded measurements in a *.CSV format file. A confirming window is displayed.
Reserved to the Administrator. Deletes the recorded measurements file. A confirming message is
displayed.
Reserved to the Administrator. Selects all the parameters displayed in this window for recording.
Reserved to the Administrator. Deselects all the parameters displayed in this window for recording.
Reserved to the Administrator. Sets the selected parameters to be recorded.
Reserved to the Administrator. Exits this window without saving the settings.
Web server • ULYSCOM ETHERNET