Ulyscom Ethernet Web Server Structure; Measurements - Enerdis ULYSCOM ETHERNET MODBUS TCP Manuel Utilisateur

ULYSCOM ETHERNET web server structure

In this chapter, the ULYSCOM ETHERNET web server structure will be described. Each section (Measurements, Counters, ...) can be
reached by:
• clicking on the relevant item in the Home section
• clicking on the relevant item at the top of the window, under the language selection area
NOTE: The following windows can change according to the account used for web server access (Administrator or User).

Measurements

This section allows to display all the measured values of the connected counter.
Start key
Stop key
Page refresh time field It allows to set the time in seconds for the measured values refresh. To enable the refresh, press Start
Configure key
Change key
Print key
Export key
28
Enables the continuous measurements refresh, according to the set time rate (Page refresh time).
Disables the continuous measurements refresh.
key. Minimum refresh time is 5 seconds.
It allows to select the parameters to be displayed in this section. A window for selection is displayed.
Changes the decimal separator. Available decimal separator: comma (,) or dot (.).
It allows to print the measurements view. A print preview window is displayed. Press print item to
confirm.
It allows to export the displayed measurements in a *.CSV format file. A confirming window is
displayed.
Web server • ULYSCOM ETHERNET