Adjusting The Hand Rest; Adjusting The Palm Rest; Reconfigure The Pistol For Left-Handed Shooters; Dismantling The Grip - Hämmerli LUFTPISTOLE AP20 Mode D'emploi

AP20
Air Pistol

5.1.1 Adjusting the hand rest

The grip can be incrementally adjusted between size S-L to adapt to your hand width. To do this
• Loosen the fastening screw (3) with the SW4 hexagonal key.
• Move the hand rest (2) to match the width of your hand.
• Tighten the fastening screw.
Check the settings using test targets. Repeat the adjustment process until the necessary stability
settings are achieved.

5.1.2 Adjusting the palm rest

The palm rest can be incrementally moved toward the hand rest to adjust for personal stability
needs. To do this
• Loosen the fastening screw (4) with the SW4 hexagonal key.
• Adjust the palm rest (5) accordingly.
• Tighten the fastening screw.
Check the settings using test targets. Repeat the adjustment process until the necessary stability
settings are achieved.

5.2 RECoNFIGuRE THE PISToL FoR LEFT-HANDED SHooTERS

The pistol can be reconfigured for left-handed shooters without additional parts. The hand rest, the
palm rest and, if desired, the cocking lever can be reconfigured on the grip. Dismantle the grip to
convert the cocking lever.

5.2.1 Dismantling the grip

• Loosen the fastening screw (6) with the SW4 hexagonal key and unscrew.
• Pull off the grip (1), remove the barrel pins on the system housing and store with the grip.

5.2.2 Reconfiguring the hand rest and the palm rest

• Unscrew the fastening screw (4) from the palm rest (5) using the SW4 hexagonal key and
remove the palm rest.
• Unscrew the fastening screw (3) from the hand rest (2) using the SW4 hexagonal key, remove
the hand rest and mount on the other side of the grip using the fastening screw.
• Attach the palm rest to the grip and screw in the fastening screw (4) using the SW4 hexagonal
key.
Adjust the hand rest and palm rest (see Chapter 5.1.1 / 5.1.2).
16