Technical Data; Before Using For The First Time; Cleaning And Heating Up For The First Time - Amica AWDM6I X-TYPE Notice D'utilisation

TECHNICAL DATA

Power supply voltage:
Frequency:
Power rating:
BEFORE USING FOR THE
FIRST TIME

Before using for the first time

A display test is carried out for 10 seconds after the appliance has been
installed and after a power cut. The fan comes on at the same time.
The appliance cannot be used during this time.

Cleaning and heating up for the first time

Remove any protective foil and sticky labels.
Remove the anti-slip mat and, if applicable, the rack from the drawer,
and sponge both with warm water and a little washing-up liquid. Dry
using a soft cloth.
Wipe the appliance inside and out with a damp cloth only, and then dry
with a soft cloth.
Replace the anti-slip mat and the rack (if applicable) in the drawer.
Then heat the empty drawer for at least two hours.
Switch the appliance on by touching the
Touch the sensor repeatedly until the LED light.
Touch the sensor repeatedly until the LED on the far right lights up.
Touch the sensor repeatedly until 2h lights up.
Close the drawer.
The warming drawer is fitted with a softclose self-closing mechanism. It
also has a contact switch, which ensures that the heating element and
fan in the appliance only work when the drawer is closed.
Metal components have a protective coating which may give off a slight
smell when heated up for the first time. The smell and any vapours will
dissipate after a short time, and do not indicate a faulty connection or
appliance. Ensure that the kitchen is well ventilated whilst the appli-
ance is being heated up for the first time.
220-240V
50/60Hz
1000W
sensor.
- 17 -