Warranty Policy; Technical Data - Walter Maxi-Grinder Série Manuel D'utilisation

Warranty policy

All WALTER power tools and accessories are inspected and tested before shipping
and are warranted to be free from any defect in material and faulty workmanship.
Should any malfunction occur within one year from the date of original purchase,
return the complete tool prepaid, with proof of purchase, to the nearest WALTER
Factory or Authorized Service Center. If an examination shows that the malfunction
was caused by defective material or faulty workmanship, WALTER will repair
(or at our option, replace) without charge. This warranty does not apply when;
normal maintenance is required, repairs or replacements have been made or
were attempted by anyone other than WALTER authorized service personnel, and
does not cover any damage caused by accidents, modifications, use of improper
accessories, abuse or misuse, which also includes overloading the tool beyond its
rated capacity as well as its continued use after partial failure. No other warranty,
written or verbal, is authorized.
In no event shall WALTER be liable for any indirect, incidental or consequential
damages from the sale of the product. This disclaimer applies both during and after
the term of this warranty.
This warranty gives you specific rights. The provisions contained in this warranty are
not intended to limit, modify, take away from, disclaim or exclude any warranties set
forth in any provincial legislation. To the extent required by law, the provisions in any
provincial, or federal legislation with respect to warranties take precedence over the
provisions in this warranty .

Technical data

Model:
Voltage:
Amperage:
No-Load R.P.M:
Wheel Diameter:
Spindle Thread:
Weight:
6170 I
120V AC, 60Hz
15.0
8,500
7"
5/8" - 11 NC
6.0 kg - 13.3 lbs
Warranty policy and technical data
6190 I
120V AC, 60Hz
15.0
6,600
9"
5/8" - 11 NC
6.0 kg - 13.3 lbs
Maxi-Grinder User's Guide
9