Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Preventive maintenance
Preventive maintenance
Your WALTER power tool should be properly maintained to insure continued
high performance.
Use low-pressure compressed air to blow out dust from the motor through the
vent openings.
Clean dust and dirt deposits from the exterior of the tool. Clean the power cord
to prevent deterioration from oil and grease and check for possible damage.
Note: Damaged cord sets must be replaced. Refer to Spare Parts List for the
ordering number.
WALTER sales and service
5977 Trans Canada Highway
Montreal:
Pointe-Claire, QC H9R 1C1
Toronto:
151 Superior Blvd, Unit 12
Mississauga, ON L5T 2L1
Vancouver:
1-1595 Cliveden Avenue West
Delta, BC V3M 6M2
Quebec:
5100 rue des Tournelles,
Suite 500
Quebec, QC G2J 1E4
Edmonton:
14578-121A Avenue
Edmonton, AB T5L 4L2
For the location of an authorized service center closest to you, CALL TOLL FREE
1 888 JWALTER (1 888 592-5837).
Visit us at our web site: www.walter.com
8
Tel.:
514 630-2801
Fax:
514 630-2825
Tel.:
905 795-8555
Fax:
905 795-8558
Tel.:
604 540-4777
Fax:
604 540-4778
Tel.:
418 622-0277
Fax:
418 622-9610
Tel.:
780 451-2053
Fax:
780 453-1589
Publicité
Chapitres
Table des Matières
