Laminating, Simple As That - LEITZ i-Lam Touch A3 Turbo Guide D'utilisation

1
2
3
4
5

Laminating, simple as that!

1. Setting up and connecting the laminator
•
Set the laminator up on a stable surface (e.g. table) close to a
mains outlet. Ensure there is sufficient space behind the lami-
nator so the laminated document is not blocked and can easily
be removed.
•
Fold out the input and output trays.
•
Connect mains cord with mains socket.
2. Switching on
•
Press the On/Off button ( ) so that it lights.
The READY indicator lights up red and the laminator heats up.
As soon as all red lights are out and the green light is on, the
working temperature has been reached and the laminator is ready
for use.
3. Inserting the document into the pouch
•
Insert the document into the laminating pouch. Align it to the
pouch's folded side as close as possible and ensure even mar-
gins on the left and right.
Pouches that are too large can be trimmed to size after lamination.
4. Laminating
Important: Lamination is permanent. Before laminating unique
pieces, test the process with a similar item. Always insert smaller
objects in the middle of the input tray so that they are recognized by
the thickness sensor.
•
When the READY indicator lights green, insert the pouch with
the folded side first straightly into the input tray until it gets
pulled in.
The laminated document is automatically driven out at the output
tray.
5. Letting the laminated document cool down
•
Remove the laminated document and leave it on a flat surface
for one minute to cool down.
•
If you do not wish to laminate further documents, switch off the
laminator.
7
