Panasonic TY-FB10HD Mode D'emploi page 4

Audio signals supported by the unit
Signal format
1125(1080)/60i:59.94i:50i
1125(1080)/30p:25p:24p:24sF:23.985sF
750(720)/60p:59.94p:50p
525(480)/59.94i
625(575)/50i
By installing this terminal board in a compatible display, its audio settings can be performed by the display. (For the
display and setting procedures as well as other details, refer to the operating instructions of the display main unit.)
In the Sound menu of the Display
SDI Sound Output
Left Channel
Right Channel
Sound Out
Level Meter
Normalise
Change
Select
Level meter display
1ch 9ch
2ch 10ch
3ch 11ch
4ch 12ch
1-8ch 9-16ch
Notes:
• Audio signal output will be suspended if signals other than the ones listed in "Audio signals supported
by the unit" have been input.
• Similarly, audio signal output will be suspended if a channel which is not one of the multiple channels
among the SDI signals has been selected.
8
Sampling
frequency (kHz)
48
48
2/2
Channel 1
Channel 2
On
Off
Return
0 dBFS
-20 dBFS (0 dB)
Shown above is a screen display for 1-8ch and 9-16ch.
Number of
bits
20bit/24bit
20bit/24bit
Left Channel: Selects the SDI audio channels whose
signals are to be output to the left channel of
the display.
Channel 1 to channel 16
(Initial setting: Channel 1)
Right Channel: Selects the SDI audio channels whose
signals are to be output to the right channel
of the display.
Channel 1 to channel 16
(Initial setting: Channel 2)
Sound Out: Sets the SDI audio output on or off
(initial setting: On).
Level Meter: Displays the SDI audio level meter.
Off, channels 1 to 8 (1-8ch), channels 9 to
16 (9-16ch)
(Initial setting: Off)
Audio Synchronized/not
channels synchronized with
(ch) video signals
Synchronized or not
16
synchronized
16 Synchronized
5ch 13ch
6ch 14ch
7ch 15ch
8ch 16ch
1-8ch 9-16ch