Publicité
Les langues disponibles
Les langues disponibles
IV - OPERATING YOUR WINE DISPENSER
Loading / unloading inert gas cartridge
1. Open the upper back-panel. (see diagram, as shown at the arrow, picture 1.)
2. One hand grasp gas cartridge turns to certain angle in order to disboard empty
gas bottle. (See diagram, as shown at the arrow, picture 2.)
3. Take the gas bottle/cartridge out of gripper introrsely. With one hand holding
the decompression valve and with the other holding cartridge, unscrew the
cartridge, take it away. (See diagram, picture 3.)
4. To insert new cartridge, first carefully line up the screw end of the cartridge to
the redactor cartridge mouth and screw into place. (See diagram, picture 2.)
5. Note: It is normal for some gas to escape while screwing on cartridge. Make
sure you screw cartridge in completely/tightly.
6. Check to make sure bottle/cartridge is secure.
7. Clip gas cartridge to cylinders clip
8.
Shut the upper back-panel down.
9.
Open wine out valve.
21
Publicité
