i-tec CHARGER6P52W Mode D'emploi page 5

This adapter allows you to charge up to 6 USB devices at the same time.
5 devices can be charged via 5 USB-A outputs and one device via the one
Quick Charge 3.0 output.
One USB-A output has DC output voltage of 5V / max. 2.4A. All five USB-A
outputs are capable of delivering maximum DC 5V / 6.8A.
SPECIFICATIONS
• The charging adapter has one Quick Charge 3.0 output for fast mobile
phone charging. Quick Charge 3.0 can charge your mobile phone from 0 %
to 80 % in just 35 minutes, which is five times faster than normal charging.
The adapter also has five USB-A outputs for charging mobile phones,
tablets, GPS navigations, powerbanks, music players, e-book readers,
cameras, Nintendo Joy-Cons, Nintendo Switch Pro controllers and other
digital devices.
• LED indication
• Input voltage AC 100-240V, 50/60Hz, max. 1.0A
• Total output power: max. 52W (5x USB-A: max. 34W; Quick Charge 3.0: max. 18W)
• USB-A output voltage: DC 5V
• USB-A output current: max. 2.4A per connector; total output max. 6.8A
• Quick Charge 3.0 output voltage: DC 5–12V (automatic detection)
• Quick Charge 3.0 output current: max. 3A
• Protection against: current overload, overvoltage, short circuit and
overheating.
• Operating values: 0°C - 40°C
• Relative humidity: 10% - 90%
• Product dimensions: 106 x 66 x 26 mm
• Product weight: 240 g
Important safety measures:
• Do not pull the power supply cable from the mains socket by pulling the cable.
• Do not connect to or pull the power cord from the socket with wet hands.
• Do not connect the adapter if it is damaged (e.g. short circuit, burnt PVC case).
• Immediately disconnect the adapter from the mains socket should you smell
burning.
• Do not disassemble this device or make modifications, as this could case
a fire risk, injury or damage to personal property. Entrust all repairs to the
manufacturer, i-tec Technologies s.r.o..
• Do not expose the adapter to direct sunlight, place it on heating elements, or
on any other heat. Do not cover it with paper or any other material that could
influence air circulation.
• Do not use the adapter in an environment with a temperature below 0°C or
higher than 40°C. Use in ventilated areas only.
• Do not place the adapter on heat-sensitive surfaces.
• Do not use the adapter with damaged supply cord, cable or fuses.
• Keep away from children.
• Ensure the output voltage of the power adapter is suitable for your device.
• Disconnect the device from mains power if you do not use it for a prolonged
period of time.
ENGLISH
Quick Start
ENGLISH | 5