Triple Transducer Connect - FujiFilm Sonosite Edge Stand Guide D'utilisation

If the large
or key (SonoSite Edge II, Edge, M-Turbo) or Delta key (MicroMaxx or TITAN) is programmed
A B
to print, press it. For instructions to program the key, see the ultrasound system user guide.
You can also save images and print them from the patient list. For instructions, see the ultrasound system user
guide.

Triple Transducer Connect

The Triple Transducer Connect (TTC) is an optional three-transducer module that lets you simultaneously
connect up to three transducers while the ultrasound system is docked.
Figure 3 Triple Transducer Connect
To connect a transducer to the TTC
1 Pull the transducer latch up and rotate 90°.
2 Align and insert the transducer connector to the connector on the bottom of the TTC.
3 Turn the latch and press down, securing the transducer connector to the TTC.
To select a transducer
Note

Push a transducer select button on the TTC.
When selecting another transducer, the system restarts. The light on the button flashes momentarily and then
turns solid green.
Only one transducer is accessible at a time.
8
Transducer
connector
Handle
Mounting post
Transducer
select buttons
When you use the TTC, there may be a minor reduction of transducer penetration.
Using peripherals and accessories