Using Peripherals And Accessories; Printer Or Bar Code Scanner - FujiFilm Sonosite Edge Stand Guide D'utilisation

To connect AC power
1 If using a mini-dock, ensure that it is connected to the system.
2 Connect the cables. See
DC power cord (A)
System AC power cord (K)

Using peripherals and accessories

Caution To avoid damaging the system, use only accessories and peripherals recommended
by SonoSite with the ultrasound system.
For specific information on using a peripheral, including warnings and cautions, see the manufacturer's
operating instructions. For the bar code scanner, see also Bar Code Scanner User Guide.
To connect a peripheral or accessory, see its assembly instructions.
Optional Peripherals and Accessories for Stand
AC-powered peripherals
Black-and-white printer
Color printer
(MicroMaxx, or TITAN) Serial bar
code scanner

Printer or bar code scanner

You configure the system for the printer or serial bar code scanner on the system's Connectivity setup page.
For instructions, see the ultrasound system user guide.
For additional information on the bar code scanner, see the Bar Code Scanner User Guide.
To print the screen
1 Turn on the printer.
2 (Color Printer Only) Change the input setting from S-video to video.
3 Do one of the following:
Use the controls on the printer for printing images. Follow the manufacturer's instructions.
Using peripherals and accessories
"Cables and connectors"
USB peripherals
(SonoSite Edge II, Edge,
M-Turbo) USB bar code scanner
(SonoSite Edge II, Edge,
M-Turbo) USB footswitch
on page 10.
Accessories
Mini-dock
Triple Transducer Connect
7