Cleaning And Disinfecting - FujiFilm SonoSite PowerPark Guide D'utilisation

Breaker location
Figure 5 The stand-module circuit breakers are on the stand's underside.

Cleaning and disinfecting

WARNINGS To avoid electrical shock, before cleaning, always disconnect the PowerPark dock
To avoid injury, always use protective eyewear and gloves when performing
To avoid infection:
Caution Use only recommended cleaners or disinfectants on surfaces. Immersion-type
disinfectants are not tested for use on surfaces.
To clean and disinfect the PowerPark stand module
Whenever you clean the system stand, be sure to also clean the attached PowerPark stand module.
Cleaning and disinfecting
from AC power.
cleaning and disinfecting procedures.
Ensure that the solution expiration date has not passed.
The level of disinfection required for a product is dictated by the type of bodily
fluids or tissue it comes into contact with during use. Ensure that the solution
strength and duration of contact are appropriate for the equipment. For
information, see the disinfectant label instructions and the recommendations of
the Association for Professionals in Infection Control and Epidemiology (APIC)
and FDA.
Breaker closed
Breaker tripped
7