Publicité
Les langues disponibles
Les langues disponibles
·
The appliance is equipped with a safety which will ensure that the machine shuts itself off if, for
example, objects which are too large are sucked up, or if fingers become tangled in the floor brush.
This is to ensure personal safety and to protect the motor. To reverse the floor brush, press the on/off
button.
USING THE HAND-HELD VACUUM CLEANER
You can also use the appliance as a hand-held vacuum cleaner. Press the button on the
back of the handle to remove it. The handle can be stored in the slot provided in the
charging station.
Use the hand-held vacuum cleaner with the floor nozzle of the 2-in-1 crevice tool. This
tool can easily be inserted and removed from the opening at the front of the hand-held
vacuum cleaner.
CLEANING AND MAINTENANCE
CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never submerge the machine
in water!
CLEANING THE DUST RESERVOIR
1.
Press the dust reservoir unlock button to remove it from the vacuum cleaner.
2.
Then take the filters out of the dust reservoir. Empty the dust reservoir.
3.
Take part A from part B and remove the sponge from part B.
4.
All parts can be cleaned under running water. Do take care to dry them completely
before using them again in the machine.
We advise replacing the filters regularly to ensure an optimal operation of the machine.
Dirty filters will reduce the suction power drastically. After every cleaning, clean the dust
reservoir and the filters to extend the life span of your machine.
CLEANING THE FLOOR BRUSH
1.
Remove the floor nozzle from the upright vacuum cleaner. Press the
release button of the floor nozzle and remove it from the machine.
2.
Open the release button on the left of the floor brush and click to release
the cover.
3.
Remove the rotating floor brush from the floor nozzle.
4.
Remove hairs and other dirt that have wrapped around the floor brush. If you do not clean the floor
brush regularly, it will become damaged and your machine will become unusable.
5.
The rotating floor brush may be rinsed off under running water. Make sure that it is completely dry
before using it.
6.
Place the floor brush back into the floor nozzle when it is clean.
7.
Click the closure valve back into place to close it. Close the release button.
8.
Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can damage the machine or your floor. Always remove the hairs stuck on the brushes.
www.domo-elektro.be
A
B
DO1013SV
21
Publicité
