Kaldewei Sound Wave Instructions De Service page 9

BLUETOOTH WIRELESS TECHNOLOGY
®
Bluetooth
® wireless technology allows
wireless connections with compatible de-
vices. For Bluetooth
necessary that there is a visual contact
between the SOUND WAVE and the other
device. The max. distance between the de-
vices should not exceed, however, 33 feet
(approx. 10 m). The connection may be
impaired by interferences due to obstruc-
tions, such as walls or other electronic
devices.
COUPLING AND CONNECTING
The steps described below relate to the
connection of a mobile phone, are howev-
er identical with the connection of a PC or
similar devices.
1. Activate the Bluetooth
phone and start search for Bluetooth
devices.
2. Select Sound Wave in the list of found
devices (KALDEWEI- _ _ _ _ ).
3. For coupling and making the connec-
tion between the SOUND WAVE and
phone, input the Bluetooth
(you will find the pass code on the
housing of the control unit).
On one of the structure-borne sound
converters, there is a sticker showing
the device name and pass code.
Paste sticker in this these installation
instructions (page 24) or note down
the data of the housing of the control
unit.
8
connections it is not
®
function on the
®
pass code
®
The SOUND WAVE conforms to the
Bluetooth
specification 3.0.
®
The following profile is supported:
Advanced Audio Distribution (A2DP) 1.0.
Please ask the manufacturers of other
devices about their compatibility with this
device.
4. After the connection between the
SOUND WAVE and phone has been
made playback can be started. The vol-
ume is controlled via the phone.
5. The next time the telephone will be
connected automatically (without hav-
®
ing to enter the password ) with the
SOUND WAVE system, as soon as the
Bluetooth
® function is activated within
the range. The SOUND WAVE system
has to be selected.
6. Up to eight devices can be stored in the
pairing mode. If a device is added, the
first paired device is overwritten.
7. After disconnecting the connection or
when the playback device is outside
the range of the SOUND WAVE the mod-
ule is again switched into the standby
mode after about 5-10 sec.
SOUND WAVE