Publicité
Assembly - pic. B-F
1.
Adjust the helmet body (pic. A/3) to the size of your
head (pic. B).
2.
Put the body (pic. A/3) to the external part (pic. A/2).
Fix the helmet body (pic. A/3) to the external part (pic.
A/2) using clips. A/2). See (pic. C).
3.
Fix the sight (pic. A/4) to the helmet by putting the
detent lever (pic. A/7) horizontally to fit the sight and
fix it in the vertical position of the detent lever (pic.
A/7). (pic. D-F).
Adjustment options
Neck strap
The helmet body can be individually adjusted to the
•
head size.
Use the neck strap to adjust the head circumference
•
using the scale and simple locking.
Make sure the helmet is fitted tightly but is not pressing.
Headphones
The height and position can be adjusted for headphones.
The height is changed by moving the headphones case.
The position can be changed by turning. For comfortable
helmet fitting and removing, the headphones can be
uncovered by pulling out.
Sight
The sight distance can be adjusted by pressing the lock
(pic. G). By this, the sight is moved to the fixture. If
necessary, the sight can be uncovered by pulling up.
Marking
Product safety:
Product corresponds to applicable EU
standards and directives
Commands:
Read carefully the Operating
Instructions. Learn carefully how the
appliance is used before using it.
Environment protection:
Dispose waste professionally so as not
Packing cardboard material may be
delivered to collecting centres for
Helmet and accessory equipment –
Any defective and/or disposed electric or
electronic devices must be delivered to
respective collection centres.
harm the environment.
recycling.
polypropylene
Package:
This side up
Technical specifications:
7 -GB
Protect against moisture
This side up
Interseroh-Recycling
Head size (variable)
Face cover dimensions
Basic sound insulation
Weight
Manufacturer's product
specification
Manufacturer
Helmet directives and
standards
Adjustable head
circumference
Directives, standards and
manufacturer of
headphones
Helmet body directives and
standards
Publicité
