Publicité
Introduction
To enjoy your new forestry helmet as long as possible,
please read carefully the Operating Instructions and the
attached safety instructions before using it. Further, we
recommend keeping the Operating Instructions to recall
the product features in the future.
Within the continuous product development, we
reserve the right to make technical changes to
improve it.
This document represents the original Operating
Instructions.
Supply includes
Take the appliance out of the transport package and check
whether there are the following parts:
External part including headphones
•
Helmet body
•
Sight
•
1 original Operating Instructions
•
Warranty Certificate
•
Please contact your dealer if any parts are missing or are
damaged.
Appliance description (pic. A)
1.
Sight adjustment
2.
External part
3.
Helmet body
4.
Sight
5.
Adjustable neck strap
6.
Headphones
Technical specifications
Head size:
Face cover size:
Weight:
Recommended threshold limits: : : :
High (H):
Medium (M):
Low (L):
Basic sound insulation (SNR): 22 dB
General instructions
After unpacking, check all parts for any damage
•
during transport.
Check whether the shipment is complete.
•
Safety instructions
Use the helmet only when adjusted properly to
•
provide comprehensive protection.
Accessory equipment recommended by the
•
manufacturer to be used only. To install any other
accessory equipment, do not change the helmet
shape.
Keep the helmet out of solvents, alcohol-, spray-,
•
varnish-, etc. –based liquids. They could damage the
plastic material.
Due to impacts or hits, the helmet does not have to
•
be visibly damaged from the outside (e.g. crazing) but
does not provide comprehensive protection in
emergency in such a case. Replace the helmet after
being exposed to heavy load.
530-650 mm
200x390 mm
0.8 kg
27 dB
20 dB
11 dB
6 - GB
Use the headphones for the whole time of exposure
•
to noise. Comprehensive protection is guaranteed if
worn for the whole time
Before use, check the helmet and the accessory
•
equipment for any damage such as scratches,
cracks, abrasions, etc. Faultless helmets and
accessory equipment to be used only.
The eye and face cover does not protect against
•
spraying with liquids (including fluid metals), hot
solids, electrical risks, infrared and ultraviolet
radiation.
Headphones
The product may get damaged by some chemicals.
•
Ask for more information from the manufacturer.
The headphone cases and especially the sealing
•
cushions may get worn out by using; therefore, they
need to be checked more often for any scratches and
untightness.
Packing the sealing cushions into "hygienic
•
coverings" may affect the sound power of the
headphones.
This helmet and headphones combination is at the
•
high level (H).
Sight
Do not use the sight if there is a predictable risk of
•
flying solid or sharp items or dangerous liquids.
The sight may only be used with the helmet and
•
headphones as designated.
Description of symbols on the sight:
Use as designated
The forestry helmet protects its wearer against head
injuries caused by falling or oscillating items and impacts
to solid objects.
Any other use will be considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damage and injuries. Please be sure to
know that our appliances have not been designed for
industrial purposes.
Please be sure to know that our forestry helmet has not
been designed for industrial or craft purposes. We are not
liable if the forestry helmet is used for industrial and craft
purposes or similar activities.
Directives, standards,
manufacturer
sight
Publicité
