Cleaning, Care & Maintenance; Crumb Tray; Troubleshooting; Technical Specifications - Buffalo GF453 Mode D'emploi

UK
Cleaning, Care & Maintenance
• Always turn Off the appliance and disconnect from the power supply before cleaning.
• Allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.

Crumb Tray

Periodically remove the crumb tray and empty.
WARNING: DO NOT remove the tray during or immediately after use as it will be hot.
Clean the crumb tray using warm, soapy water.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The appliance is not working
Appliance does not reach set
temperature
Appliance heats up but indicator light
does not come on
Power indicator light comes on but
appliance does not heat up
Appliance slow to heat up

Technical Specifications

Model Voltage
GF453 230V 50Hz
L508 230V 50Hz
3
Probable Cause
The appliance is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Faulty thermostat
Faulty element
Bulb has expired
Faulty element
Faulty thermostat
Thermostat set incorrectly (L508
only)
Faulty element
Power Current
2800W 12.2
2200W 9.6A
Action
Check the appliance is plugged in correctly
and switched on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Check thermostat
Call BUFFALO agent or qualified technician
Dimensions
h x w x d (mm)
302 x 386 x 643
315 x 598 x 405
Weight
(kg)
13.2
16.5