Publicité
Requirements | Assembly instructions | Care information
•
Observe the local building regulations and the snow load zones in your region.
•
Before the assembly sort the parts and check the contents list according to the assembly instructions.
•
At least 2 persons are required to assemble the carport kit.
•
Follow the instructions and installation steps in the assembly instructions.
•
The Twin-Wall Sheets do not walk on transverse running boards (at least 2 rafters).
•
Point loads must be avoided absolutely
•
Regularly remove snow from the roof
•
Snow load 100 kg/m²It makes sense to install a snow guard above the carport.
•
Keep the gutter free of leaves, dirt and snow.
•
The carport kit must be installed on a flat, solid surface (for example dry concrete).
Foundation dimensions: length 40cm x width 40cm x depth 80cm
•
Clean the Twin-Wall Sheets with water and a mild detergent and do not use abrasives, acetone or solvents!
•
Defective or bent posts or beams must be replaced immediately.
Colour and size deviations etc. within the usual tolerances reserved. Our recommendations do not release the custo-
mer from the obligation to check the product on his own responsibility. In case of doubt, please consult a specialist.
Technical modifications reserved
Intended use:
The Premium Carport was developed and manufactured in accordance with EN 1090. It may only be used to roof a car parking space. Any
use other than the intended use described here is considered improper use. The manufacturer is not liable for any damage or consequential
damage resulting from improper, incorrect or inappropriate use.
4 und 5
13, 17, 19
17
TX 25
GB
3
3
Publicité
