Cutting Height; Filling With Oil - Husqvarna LB 348V Manuel D'utilisation

ASSEMBLING AND ADJUSTMENTS
Mulching function
A mulching-kit is available as an accessory, to make the
machines equipped with a catcher able to be used with
mulching function.
The Mulching-kit consist of a mulching plug and a mulching
knife.
Fit the mulching plug in place.
• Lift up the back shield and remove the container.
• Insert the mulching plug into the collector channel.
• Close the shield and ensure that it is locked with the
mulching plug.
72 –
English

Cutting height

CAUTION! Do not set the cutting height too low as there is
a risk that the cutters might hit ground with unevenness.
The cutting height can be adjusted in five different steps, mm.

Filling with oil

• The oil tank is empty at delivery. Fill the oil slowly. See also
instructions under the Maintenance heading. The engine
oil should be changed the first time after 5 hours running
time.