Connecting To Power Supply; Using The Grinding Wheel; Replacing A Grinding Wheel - Pattfield Ergo Tools PE-150DS Traduction De La Notice Originale

CONNECTING TO POWER SUPPLY

1 Plug the power plug

USING THE GRINDING WHEEL

1 Place the work piece firmly on the work
rest 9 and hold it to one of the grinding
wheels 3 or 10 at an adequate angle.

REPLACING A GRINDING WHEEL

1 Press switch 7 to OFF position (O).
2
Pull the power plug
3 Remove the wheel guard
the wheel guard securing bolts 4.
4 Hold the grinding wheel
and remove the locking nut.
5 Replace the grinding wheel
clean the parts before reinstalling them
according to the picture.
5 into socket.
hand to ensure that they run freely.
grinding wheels to stop rotating.
5
out of the socket.
2 by removing
3 or 10 firmly
3 or 10 and
2 Press switch 7 to ON position (I).
Caution! Before connecting to the
power supply, rotate the wheels by
Caution! Always switch off and un-
plug the grinder first. Wait for the
EN 87