Bushnell BACK TRACK GPS HuntTrack Mode D'emploi page 7

RecoRdinG a neW TRiP (RouTe)
• Press TRIP/DATA (3) to enter Trip mode. HOLD the
TRIP/DATA button to start recording new trip data. The
display shows a moving "hiker" icon, along with updated
readouts of elapsed distance and average speed during
your trip (Fig. 9). Keep the HuntTrack powered ON
during your trip.
• To stop recording the trip data, HOLD the TRIP/DATA
button again.
• The HuntTrack automatically saves the data it collects between the time
you start and stop recording your trip, including the date and time of the
trip, total distance traveled, your average speed, and changes in altitude and
temperature.
VieWinG THe daTa ScReenS
Press TRIP/DATA (3) briefly to view and cycle through the HuntTrack's data
screens (when in Trip mode, don't hold the button down or you will start a new trip or
stop your current trip). Press POWER briefly to return to the main navigation screen.
The 6 data screens display (in order) the following data for your current location :
1. Sunrise/Sunset and Moon Phase
2. Temperature, Barometric Pressure, and Weather Trend
3. Animal Activity (current level and graph over +/- 12 hour period)
4. Distance and Average Speed (current or last trip) and Remaining Memory
(% of trip data used). The HuntTrack can store up to 48 hours of total trip
data (can be multiple trips on different days). See Fig. 9 above.
5. Route Traveled (from start to stop points of current or last trip)
6. Compass w/Altitude and Lat/Long
1 2 3 5
Fig. 9
6
7