LaserLiner CompactCube-Laser 3 Mode D'emploi page 8

Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
laser device is passed on, this document must be passed on with it.
Automatic cross-line laser with lateral 90° laser
and slope function
General safety instructions
– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail
or the battery charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars) be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40...1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices
are in operation.
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser < 1 mW · 635 nm
EN 60825-1:2014/AC:2017