Philips SalonStraight Pro XL HP4667 Mode D'emploi page 10

EnglisH
10
straightening
1 Put the plug in the wall socket.
 Press the on/off button.
The temperature setting of 110 appears on the display (Fig. 2).
,
As soon as the appliance has heated up to this setting, the word
,
'READY' appears on the display.
Tip: If you lock the plates with the closing lock, the straightener heats up
more quickly.
 Select a temperature setting that is suitable for your hair type.
- Select a low temperature setting when you use the straightener for
the first time.
- For coarse, curly or hard-to-straighten hair, select a medium to high
setting (170 and up).
- For fine, medium-textured or softly waved hair, select a medium to
low setting (160 and down).
Take extra care with pale, blonde, bleached or colour-treated hair, since
it is susceptible to damage at high temperatures.
 Press the + button to increase the temperature setting or press
the - button to decrease the temperature setting (Fig. 3).
The display shows the selected temperature setting.
,
When the appliance has heated up to the selected setting, the word
,
'READY' appears on the display.
The bars on the display show the remaining usage time of the
,
appliance. The total usage time is 60 minutes. Every ten minutes one
of the six bars disappears.
5 Comb or brush your hair so that it is disentangled and
smooth. (Fig. 4)
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Tip: It is better to section off the crown area and to straighten the hair
underneath first, followed by the top area.