Pattfield Ergo Tools PE-900HO Traduction De La Notice Originale page 86

MACHINE SPECIFIC SAFETY WARNINGS
FOR PLANERS
a) Wait for the cutter to stop before set-
ting the tool down. An exposed rotating
cutter may engage the surface leading to
possible loss of control and serious injury.
b) Hold the power tool by insulated grip-
ping surfaces only, because the cutter
may contact its own cord. Cutting a
"live" wire may make exposed metal parts
of the power tool "live" and could give the
operator an electric shock.
c) Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by your
hand or against the body leaves it unstable
and may lead to loss of control.
d) Do not reach into the saw dust ejector
with your hands. They could be injured by
rotating parts.
e) Apply the machine to the workpiece
only when switched on. Otherwise there
is danger of kickback when the cutting tool
jams in the workpiece.
f) When working, always hold the planer
in such a manner that the planer base
plate faces flat on the workpiece. Oth-
erwise the planer can become wedged and
lead to injuries.
g) Never plane over metal objects, nails or
screws. The planer blade and the blade
shaft can become damaged and lead to
increased vibrations.
84 EN