Toolland FT5130 Mode D'emploi page 5

5.4 Changing a Gas Cylinder
Only replace the gas cylinder in a non-flammable and non-smoking environment.
1. Close the valve of the gas cylinder.
2. Unscrew the regulator from the valve of the cylinder. Remove the device. Take the empty cylinder away
from the heater.
3. Make sure the sealing of the pressure controller is still place.
4. Install the heater onto a new gas cylinder. To do so, follow the instructions described above.
5.5 Storage
1. Disconnect the heater from the cylinder. Refer to the instructions described above.
2. Store the cylinder in a well-ventilated area, preferably in an outhouse, away from any combustible
materials.
3. Store the heater in its original package and keep in a dry and dust-free environment.
6. Cleaning and Maintenance
 Have the heater checked by a qualified authorized technician once a year.
 Periodically check that the gas hose is intact. If it is expired, have it replaced. Only use a gas hose of the
correct length.
Cleaning
 Clean the heater using a soft and dry cloth. Avoid using aggressive, abrasive or inflammable products.
7. Technical Specifications
heating power
type of gas
maximum pressure
butane
propane
consumption
pressure valve
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 07/07/2015
FT5130
2.6-4.5 kW
butane/propane (i3+)
28-30 Mbar
37 Mbar
330 g/h
required, not included
5 ©Velleman nv