Tectro TP 20 Manuel D'utilisation page 55


AT T E N T I O N !
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• Never seal the room - where this device will be used - completely
airtight. This will prevent under pressure in this room. Under
pressure can disrupt the safe operation of geysers, ventilation
systems, ovens, etc.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
B
I N S TA L L AT I O N

WA R N I N G
Before using the air conditioner it should be left in an upright position
for at least 2 hours.
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
Ensure that the unit is positioned upright and on a level surface.
Do not operate the unit inside the bathroom, shower, or in any other very
humid environment.
Please keep a distance of 50 cm between the unit and the wall or other
objects to ensure proper air circulation.
Insert both ends of the air exhaust hose
the connectors by turning them clockwise onto the hose.
Insert one round connector
connector to the window air outlet
E n s u re that the window air outlet
window or door as much as possible to prevent outside air from entering the
room.

I M P O RTA N T
The flexible exhaust hose should be less than 1m during operation,
which provides the best performance. This length has been designed
especially according to the specifications of the air conditioner. Do not
use an extension or exchange for a different hose as that may lead to
malfunctioning. The exhaust air must flow freely, any blockage can lead
to overheating of the air conditioner. Take care to prevent any bow or
bend in the exhaust hose.
in the round connectors
in the backside of the unit
.
has a free flow outside. Close the
. Fasten
. Fasten the other
4
55