Dometic SabreLinkFlex Instructions De Montage Et De Service page 9

SabreLinkFlex
• Do not operate the device if any of the components have been sub-
jected to moisture.
• Only use accessories that are recommended by the manufacturer.
• Do not modify or adapt any of the components in any way.
Fire hazard
• When positioning the device, ensure the supply cord is not trapped or
damaged.
• Do not locate multiple portable socket-outlets or portable power sup-
plies at the rear of the device.
Health hazard
• If the flexible wiring connected to this light is within arms reach fix it to
the wall to reduce the risk of strangulation.
CAUTION! Failure to obey these cautions could result in minor or
!
moderate injury.
Health hazard
• When positioning the device, ensure that all cables are suitably
secured to avoid any form of trip hazard.
NOTICE! Indicates a situation that, if not avoided, can result in
A
property damage.
• Check that the voltage specification on the type plate corresponds to
that of the energy supply.
• Ensure that the mains power adapter is plugged into an outlet that has
an residual current device.
• Never pull the plug out of the socket by the cable.
• Never immerse the device in water.
• Protect the device and cables against heat and moisture.
• The device shall not to be exposed to rain.
EN
Safety instructions
9