Sony Cyber-shot DSC-RX100M3 Mode D'emploi page 35

Masquer les pouces Voir aussi pour Cyber-shot DSC-RX100M3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Take care that your fingers or other objects are not caught in the lens when it is
operating.
• Take care that your finger is not in the way when pushing the viewfinder down.
• Do not forcibly push down the viewfinder when the eyepiece is pulled out.
• If water, dust or sand adheres to the viewfinder unit, it may cause a malfunction.
Notes on shooting with the viewfinder
This camera is equipped with an Organic Electro-Luminescence viewfinder with
high resolution and high contrast. The camera is designed to provide an easily
viewable viewfinder by appropriately balancing various elements.
• The image may be slightly distorted near the corners of the viewfinder. This is not
a malfunction. When you want to check every detail of the entire composition, you
can also use the monitor.
• If you pan the camera while looking into the viewfinder or move your eyes
around, the image in the viewfinder may be distorted or the color of the image may
change. This is a characteristic of the lens or display device and is not a
malfunction. When you shoot an image, we recommend that you look at the center
area of the viewfinder.
Notes on the flash
• Do not carry the camera by the flash unit, or use excessive strength on it.
• If water, dust or sand get into the open flash unit, it may cause a malfunction.
• Take care that your finger is not in the way when pushing the flash down.
Sony accessories
Use only genuine Sony brand accessories, otherwise it may cause a malfunction.
Sony brand accessories may not come to market for some countries or regions.
On camera's temperature
Your camera and battery may get hot due to continuous use, but it is not a
malfunction.
On the overheat protection
Depending on the camera and battery temperature, you may be unable to record
movies or the power may turn off automatically to protect the camera.
A message will be displayed on the screen before the power turns off or you can no
longer record movies. In this case, leave the power off and wait until the camera and
battery temperature goes down. If you turn on the power without letting the camera
and battery cool down enough, the power may turn off again or you may be unable
to record movies.
On charging the battery
• If you charge a battery that has not been used for a long time, you may be unable
to charge it to the proper capacity.
This is due to the battery characteristics. Charge the battery again.
Batteries which have not been used for more than a year may have become
deteriorated.
GB
GB
35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cyber-shot dsc-rx10m3Cyber-shot dsc-rx100m iii

Table des Matières