Device - SilverCrest SBS 60 B2 Instructions D'utilisation Et Consignes De Sécurité

To connect your device to the product
via Bluetooth , follow the steps below:
®
1 . During ON mode, press the
repeatedly on the product or press the
Bluetooth button to select Bluetooth
®
mode . The blue indicator
slowly .
2 . If you cannot find the product, press and
/ PAIR button on the remote
hold the
control for approx . 2 seconds . The system
has entered pairing mode . You will hear a
signal sound from the product and the blue
indicator will flash fast .
8
Activate your Bluetooth
the search mode . "SBS 60 B2" will
appear on your Bluetooth
3 . Select "SBS 60 B2" in the pairing list .
After the system is successfully connected,
it says "Paired" and the blue indicator
will light up solidly .
4 . Play music from the connected device .
To disconnect the Bluetooth
you can:
Switch to another function on the product .
Disable the function from your Bluetooth
device . The Bluetooth
disconnected from the product after it says
"Disconnected" .
Press and hold the
remote control .
Tips:
Enter "0000" for the password if necessary .
If there is an existing connection, press and
/ PAIR button on the remote
hold the
control to re-activate the pairing mode, the
existing connection will be interrupted, the
blue indicator will flash .
8
button
2
®
will flash
8
device and select
®

device .

®
8
function,
®
®
device will be
®
/ PAIR button on the
If no other Bluetooth
player within two minutes, the player will
recover its previous connection .
The player will also be disconnected when
your device is moved beyond the operational
range approx . 10 metres .
If you want to reconnect your device to this
player, place it within the operational range .
If the device is moved beyond the operational
range, when it is brought back, please check
if the device is still connected to the player .
If the connection is lost, follow the instructions
above to pair your device to the player again .
˜ Listen to music from Bluetooth
device
If the connected Bluetooth
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player .
If your audio player supports Audio Video
Remote Control Profile (AVRCP), you can
control the basic functions of the audioplayer
with the soundbase's remote control .
1 . Pair your device with the player .
2 . Play music via your device (if it supports
A2DP) .
3 . Use supplied remote control to control play
(if it supports AVRCP) .
- To pause / resume play, press the
/ PAIR button .
- To skip to a track, press the
buttons .
device pairs with this
®
device supports
®
,
GB/IE
®
31