Introduction; Intended Use; Trademark Notice; Scope Of Delivery - SilverCrest SBS 60 B2 Instructions D'utilisation Et Consignes De Sécurité

TV STEREO SOUND BASE
˜ Introduction
We congratulate you on the purchase of your
new product . You have chosen a high quality
product . The instructions for use are part of the
product . They contain important information
concerning safety, use and disposal . Before using
the product, please familiarise yourself with all
of the safety information and instructions for use .
Only use the product as described and for the
specified applications . If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it .
Note: The soundbase is mainly referred as "the
product" in this manual .
˜ Intended use
This is a consumer electronics product . The
soundbase is intended for playing sound from
audio devices . The product must only be used
indoors . The product is designed for private use,
and must not be used for commercial purposes .
Any other use is considered improper . Any
claims resulting from improper use or due to
unauthorised modification of the product will be
considered un warranted . Any such use is at your
own risk .
˜ Trademark notice
- USB is a registered trademark of USB
®
Implementers Forum, Inc .
- The Bluetooth word mark and
logos are registered trademarks of
Bluetooth SIG, Inc . and any use of such
marks by OWIM GmbH & Co . KG is under
license .
- The SilverCrest trademark and trade name is
the property of their respective owners .
Any other names and products may be
trademarks or registered trademarks of their
respective owners .
˜ Scope of delivery
Immediately after unpacking, please check
the package contents for completeness and
if the product and all parts are in good
condition .
Remove all parts from the packaging . Remove
the packaging material completely .
1 Remote control
(included CR2025 3 V battery inserted)
1 AC power cord
1 Cinch to 3 .5 mm jack plug cable
1 HDMI ARC cable
1 Instructions for use
The design is subject to change without notice .
˜ Parts description
Soundbase (main unit)
button (switch the product between ON
1
and STANDBY mode)
button (select the source)
2
EQ button (select a preset sound effect)
3
VOL+ / VOL – buttons (increase / decrease
4
the volume level)
Remote control sensor
5
POWER indicator (light up red when the
6
product is in STANDBY mode)
AUX1 / AUX2 indicator
7
(orange indicator lights up: In AUX1 mode /
orange indicator flashes: In AUX2 mode)
Bluetooth indicator (blue indicator lights up:
8 ®
in Bluetooth mode)
®
OPTICAL / COAXIAL indicator
9
(orange indicator lights up: In OPTICAL
mode / orange indicator flashes: In COAXIAL
mode)
HDMI ARC / USB indicator (orange indicator
10
lights up: In HDMI ARC mode / orange
indicator flashes: In USB mode)
I/O switch (POWER ON/OFF)
11
GB/IE 21