Publicité
Les langues disponibles
Les langues disponibles
EN
◼ Install the blades by first inserting the rear part (Fig. 5c). Press the blades with your
thumb to clip them in.
◼ Switch the clippers on for a few seconds after lubricating them.
4
SERVICING
4.1 ROUTINE SERVICING
◼ After using the clippers each time, clean the blades with the brush supplied (Fig. 1-H).
◼ If necessary, clean the body of the clippers with a cloth slightly dampened with water
or mild liquid soap. Never use abrasive products or solvents.
◼ Clean the blades with an antibacterial spray. We recommend STERIL CLEANER 920
disinfectant, lubricant and cooling products.
◼ Lubricate the blades at least once a day (see § 3.5).
4.2 CLEANING THE BLADE
In the case of regular use, clean the blades at least once a day.
◼ Remove the blades as described in § 3.5.
◼ Clean the inside of the blades with the brush supplied (Fig. 6).
◼ With your thumb, press on the 2 lugs (arrows) to move the fixed/mobile blades (Fig. 6).
Eliminate all cutting debris and residues stuck between the blades.
◼ Lubricate the blades and put back on the clippers as described in § 3.5.
26
Publicité
