Publicité
Les langues disponibles
Les langues disponibles
EN
3
USE
3.1 CHARGING THE BATTERY
It is essential to charge the battery for at least 2 hours before using the clippers for
the first time.
Charge the clippers at least once during the year following the date of delivery.
The battery reaches its full capacity after 3 or 4 charging cycles.
The equipment must only be used with
the power pack it was supplied with.
WARNING: To recharge the battery, use
only the removable power pack supplied
with the equipment.
When charging, it is recommended to switch off the clippers (On/Off button in OFF
position, Fig. 1-B).
Charging clippers from mains
◼ Insert the electrical lead into the socket of the clippers (Fig. 2).
◼ Connect the power pack (Fig. 1-M) to a mains power socket.
◼ During charging, the red indicator light (Fig. 1-D) comes on steadily and the green
indicator light (Fig.1-C) flashes. When the battery is fully charged, the green indicator
light comes on steadily.
The autonomy is about 210 minutes.
◼ When completely charged, disconnect the power pack. The clippers can now be used
without the electrical lead.
Use only with the
RY035100EU power
pack.
24
Publicité
