BTI BH 2-26 Notice Originale page 34

OBJ_BUCH-3325-001.book Page 34 Friday, September 22, 2017 4:26 PM
 Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the pow-
er tool for operations different from those intend-
ed could result in a hazardous situation.
Service
 Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.
Hammer Safety Warnings
 Wear ear protectors. Exposure to noise can
cause hearing loss.
 Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
 Hold the tool by the insulated gripping surfac-
es when performing operations where the ap-
plication tool or the screw could contact hid-
den wiring or its own power cord. Contact with
a "live" wire will also make exposed metal parts
of the power tool "live" and shock the operator.
 Hold power tool by insulated gripping surfaces
when performing an operation where the cut-
ting accessory may contact hidden wiring.
Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
 Use appropriate detectors to determine if util-
ity lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property
damage.
 When working with the machine, always hold
it firmly with both hands and provide for a se-
cure stance. The power tool is guided more se-
cure with both hands.
 Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
 Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
Delivery Scope
Rotary hammer, auxiliary handle and depth stop.
Application tools and other accessories shown or
described are not part of the standard delivery
scope.
A complete overview of accessories can be found
in our accessories program.
34 | English
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in
electric shock, fire and/or serious inju-
ry.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for hammer drilling in
concrete, bricks and masonry, as well as for light
chiselling work. It is also suitable for drilling without
impact in wood, metal, ceramics and plastic, as
well as for screwdriving.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Quick change keyless chuck (BH 2-28 F)
2 SDS-plus quick change chuck (BH 2-28 F)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck (BH 2-28 F)
7 Rotational direction switch
8 Lock-on button for On/Off switch
9 On/Off switch
10 Release button for mode selector switch
11 Mode selector switch
12 Button for depth stop adjustment
13 Depth stop
14 Auxiliary handle (insulated gripping surface)
15 Handle (insulated gripping surface)
16 Securing screw for key type drill chuck*
17 Key type drill chuck*
18 SDS-plus adapter shank for drill chuck*
19 Drill chuck mounting (BH 2-28 F)
20 Front sleeve of the quick change keyless
chuck (BH 2-28 F)
21 Retaining ring of the quick change keyless
chuck (BH 2-28 F)
22 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 92A 41Y • 22.9.17