Refuelling - FUXTEC FX-EB152 Mode D'emploi Original

26. Refueling
FUEL AND 2-STROKE OIL
Use unleaded petrol with 2-stroke engine oil in a 40:1 ratio. During the first operations,
a mixing rate of 25:1 can be selected to initially lubricate all device parts optimally.
WARNING: Never use pure petrol in your engine. This causes permanent engine
damage and excludes the manufacturer's warranty for this product. Never use a fuel
mixture that has been stored for over 90 days.
WARNING: It must be a first-class oil for 2-stroke air-cooled devices.
FUEL MIXTURE
Mix fuel with 2-stroke oil in a particular container. Please note
the mixture table on the following page for the correct fuel/oil ratio. Shake the container
to ensure complete mixing.
Petrol
1 Liter
2 Liters
WARNING: Lack of lubrication excludes the manufacturer's liability.
Petrol and oil must be mixed in a 40:1 ratio. The use of a different fuel mixture will
invalidate the warranty.
Recommended fuel
It is recommended to use unleaded petrol with an octane number of 90 # or higher to
reduce carbon deposition in the combustion chamber. Do not use old or dirty petrol.
Keep the fuel tank dust-free and avoid water getting into the tank. Sometimes it will
misfire under usual overload.
If the backfiring can be heard under the average load, we recommend replacing the fuel.
If the backfire is still present afterward, please contact an authorized workshop.
Original User Manual FUXTEC FX-EB152/FX-EB162_de_en_fr_rev15
Two-stroke engine oil
(40:1)
0,025 Liters
0.050 Liters
Two-stroke engine oil
Petrol
5 Liters 0.125 Liters
10 Liters 0.250 Liters
42
(40:1)