Mounting The Drilling Attachments - FUXTEC FX-EB152 Mode D'emploi Original

25.

Mounting the drilling attachments

Place the drilling attachment (A) on the drive shaft (B). Connect the drill to the drive
shaft (B) of the gear device using the supplied screw (C) and screw it to the nut (D).
Warning!
Ensure that all components are correctly assembled and installed and that all screws are
tightened.
Original User Manual FUXTEC FX-EB152/FX-EB162_de_en_fr_rev15
C
A
B
D
41