Assembly As Leaf Blower - FUXTEC FX-LB152P Mode D'emploi Original

Original User Manual FUXTEC Petrol leaf blower FX-LB152P_de_en_fr_ita_rev01

28. Assembly as leaf blower

Caution: Always switch off the engine when carrying out assembly and/or maintenance work!
Wear protective gloves during assembly to protect yourself from cuts.
a) Connection of the flexible hose:
- Insert the angled tube (no.11) into the flexible hose up to the
end.
- Tighten the screw on the clamp to secure the connection
between the angled tube and the flexible hose.
TIP: Lubricate the hoses a little to facilitate assembly.
b) Connect the flexible hose to the blowpipe:
- Insert the rear blowpipe (no.5) into the flexible hose (no.3) up to
the end.
- Tighten the screw on the clamp to secure the connection
between the rear blowpipe and the flexible hose.
TIP: Lubricate the hoses a little to facilitate assembly.
37