Hive Active Guide D'installation page 13

Once paired your thermostat will
3
take you through guided set-up
The first time you connect your Hive
thermostat, it will walk you through the
set-up process.
• Firstly, you'll need to confirm the wires
shown in green are the ones you want
to connect. The Hive thermostat will
automatically detect when a wire is
connected to a terminal.
• You'll then need to tell us whether your system is a gas furnace or an
electric air handler. Don't worry if you're not sure, we've got that covered too.
• If you have connected wires to other terminals, like O/B and ACC,
we'll ask you a couple more questions.
• You'll then see a quick welcome tour where you'll learn the common
interactions on the thermostat itself.
Once we know these things about your system, you can continue to set up
your schedules on the thermostat or switch to the app or website to do this.
Hot tip: If you need to rewire at this point make sure the power is off at the
electrical breaker box.
Welcome to Hive.
Let's take a tour.
(Press back button to skip tour)
12